DTC | M.U.T.-III SE screen terms (Trouble diagnosis content) | DTC detection condition |
P2765 | 00 | INPUT SPEED SENSOR B (Input/Turbine Speed Sensor B Circuit) | Diagnosis condition | When all of the following conditions are satisfied:- TCM power supply voltage: More than 11 V
- After range change completion, it spends 2 seconds or more.
|
Signal | Output speed sensor signal |
Threshold | When all of the following conditions are satisfied:- Secondary pulley speed: Less than 149 rpm
- Primary pulley speed: 1,000 rpm or more
|
Diagnosis delay time | 5 seconds |