DTC | M.U.T.-III SE screen terms (Trouble diagnosis content) | DTC detection condition | ||
P0847 | 00 | FLUID PRESS SEN/SW B (Transmission Fluid Pressure Sensor/Switch B Circuit Low) | Diagnosis condition | When all of the following conditions are satisfied:
|
Signal | — | |||
Threshold | Secondary pressure sensor voltage: 0.09 V or less | |||
Diagnosis delay time | 5 seconds |
FLUID TEMP | : −20°C (−4°F) |
caution | When the ambient temperature is less than −20°C (−4°F) and the engine is cold, warm up the engine for approximately 5 minutes. |