DTC | M.U.T.-III SE screen terms (Trouble diagnosis content) | DTC detection condition |
P0793 | 00 | INTERMEDIATE SPEED SENSOR A (Intermediate Speed Sensor A Circuit No Signal) | Diagnosis condition | When all of the following conditions are satisfied:- TCM power supply voltage: More than 11 V
- After range change completion, it spends 2 seconds or more.
|
Signal | Primary speed sensor signal |
Threshold | When all of the following conditions are satisfied:- 10-msec-ago primary pulley speed: 1,000 rpm or more
- Now primary pulley speed: 0 rpm
|
Diagnosis delay time | 0.5 seconds |