DTC | M.U.T.-III SE screen terms (Trouble diagnosis content) | DTC detection condition |
P0791 | 00 | INTERMEDIATE SPEED SENSOR A (Intermediate Speed Sensor A Circuit) | Diagnosis condition | When all of the following conditions are satisfied:- TCM power supply voltage: More than 11 V
- After range change completion, it spends 2 seconds or more.
|
Signal | Primary speed sensor signal |
Threshold | When all of the following conditions are satisfied:- Primary pulley speed: Less than 150 rpm
- Secondary pulley speed: 500 rpm or more
|
Diagnosis delay time | 5 seconds |