[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTCM.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
P060500CONTROL MODULE ROM
[Internal Control Module Read Only Memory (ROM) Error]
Diagnosis conditionWhen the ignition switch is ON
Signal
ThresholdTCM ROM area sum parity check detects malfunction in ROM.
Diagnosis delay time
 
 
POSSIBLE CAUSE
TCM
 
 
FAIL-SAFE
  • Selector shock is large
  • Start is slow
  • Acceleration is slow
  • Lock-up is not performed
 
 
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always the ignition switch is OFF and wait at least 10 seconds before conducting the next test.
: .
 
2.CHECK DTC DETECTION
  1. The ignition switch is ON and wait 1 seconds or more.
  2. Check the DTC.
Is “P0605-00” detected?
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END