[Previous][Next]
Diagnosis Procedure
1.CHECK DTC PRIORITY
With M.U.T.-III SE
  1. Perform “Self-diagnosis” in “TRANSMISSION”.
  2. Check the DTC whether it is related to the CVT system warning. Refer to DTC Index.
Is applicable DTC detected?
Perform diagnosis of applicable. Refer to DTC Index.
.
 
2.CHECK DTC DETECTION
With M.U.T.-III SE
  1. Start the engine.
  2. Select “Data List” in “TRANSMISSION”.
  3. Select “T/M warning indicator DTC”.
  4. Confirm that detected DTC.
Is any DTC detected?
Review the detected DTC in the past which was displayed in the "Data List". Refer to DTC Index.
INSPECTION END