Component Inspection (Cooling Fan Relay)
1.
CHECK COOLING FAN RELAY
Turn ignition switch OFF.
Remove cooling fan relay.
Check the continuity between cooling fan relay terminals under the following conditions.
Terminals
Conditions
Continuity
3 and 4
12 V direct current supply between terminals 1 and 2
Existed
No current supply
Not existed
Is the inspection result normal?
INSPECTION END
Replace malfunctioning cooling fan relay.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
INSPECTION END
Replace malfunctioning cooling fan relay.