[Previous][Next]
Removal and Installation
 
 
REMOVAL
 
 
1. Disconnect battery cable from negative terminal. Refer to Precautions for Removing Battery Terminal.
2. Remove air cleaner assembly. Refer to Removal and Installation.
3. Remove “B” terminal nut and “B” terminal harness.
4. Remove “S” terminal harness (with “S” terminal nut).
5. Remove starter motor mounting bolts, and then remove starter motor from the vehicle.
 
 
INSTALLATION
Note the following items, and then install in the reverse order of removal.
caution
  • Install “B” terminal harness and “S” terminal harness to starter motor in following installation angle.
    : Vehicle front
  • Be careful to tighten “B” terminal nut to the specified torque. Refer to Exploded View.