1. Remove under cover RH 
. | : Vehicle front |
2. Disconnect the harness connector from EVAP canister control pressure sensor and the EVAP canister vent control valve.
3. Disconnect the EVAP canister purge hose, the EVAP canister vent line, and the EVAP canister vent control valve hose.
4. Remove the EVAP canister bolt.
5. Remove the EVAP canister from the vehicle.
6. Remove the following from the EVAP canister (if necessary).- EVAP canister control pressure sensor.
- EVAP canister vent control valve.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)