[Previous][Next]
Component Inspection (Engine Oil Pressure Control Solenoid Valve)
1.CHECK ENGINE OIL PRESSURE CONTROL SOLENOID VALVE
  1. Turn ignition switch OFF.
  2. Disconnect engine oil pressure control solenoid valve harness connector.
  3. Check resistance between engine oil pressure control solenoid valve terminals as follows.
    Engine oil pressure control solenoid valveConditionResistance
    Terminal
    1 2Temperature20°C (68°F)19.8 - 24.2 Ω
    1Ground∞Ω
    (Continuity should not exist)
    2
Is the inspection result normal?
INSPECTION END
Replace engine oil pressure control solenoid valve. Refer to Exploded View.