Component Inspection (Condenser-1)
1.
CHECK CONDENSER-1
Turn ignition switch OFF.
Disconnect condenser-1 harness connector.
Check resistance between condenser-1 terminals as per the following.
Condenser-1
Resistance
+
-
Terminal
1
2
Above 1 MΩ [at 25C° (77C°)]
Is the inspection result normal?
INSPECTION END
Replace condenser-1.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
INSPECTION END
Replace condenser-1.