[Previous][Next]
Component Inspection (Active Grille Shutter)
1.CHECK ACTIVE GRILLE SHUTTER
With M.U.T.-III SE
  1. Start the engine.
  2. Select "ACTIVE GRILLE SHUTTER" in "Special Function" of "ENGINE" using M.U.T.-III SE.
  3. Touch “CALIBRTN”.
  4. After the calibration completes, check the operation of active grille shutter as follows.
    ConditionActive grille shutter
    Select “CLOSE”Open → Close
    Select “OPEN”Close → Open
 
Without M.U.T.-III SE
  1. Turn ignition switch OFF.
  2. Operate shutter by hands to close position.
  3. Check the operation of active grille shutter as follows.
    ConditionActive grille shutter
    Ignition switch: ONClose → Open
 
Is the inspection result normal?
INSPECTION END
Replace active grille shutter. Refer to Removal and Installation.