[Previous][Next]
DTC Diagnosis Procedure
The electrical load signal (Headlight switch signal, rear window defogger switch signal, etc.) is transferred via the CAN communication.
1.INSPECTION START
Confirm the malfunctioning circuit (rear window defogger, headlight or heater fan). Refer to Component Function Check.
Which circuit is related to the incident?
:
:
:
 
2.CHECK REAR WINDOW DEFOGGER SYSTEM
Check rear window defogger system. Refer to Work Flow.
: INSPECTION END
 
3.CHECK HEADLIGHT SYSTEM
Check headlight system. Refer to Work FlowWork Flow.
: INSPECTION END
 
4.CHECK HEATER FAN CONTROL SYSTEM
Check heater fan control system. Refer to Work Flow (with automatic air conditioner) or Work Flow (with manual air conditioner).
: INSPECTION END