DTC Diagnosis Procedure
1.
CHECK ECM POWER SUPPLY AND GROUND CIRCUIT
Check ECM power supply and ground circuit. Refer to Diagnosis Procedure
DTC Diagnosis Procedure
.
Is the inspection result normal?
.
Repair or replace error-detected parts.
2.
CHECK SELF-DIAGNOSTIC RESULT
Check that DTCs related to the fuel system and the cooling system are not detected.
Is any DTC detected?
Check the DTC. Refer to
DTC Index
.
.
3.
PERFORM DTC CONFIRMATION PROCEDURE
Erase DTC.
Perform DTC Confirmation Procedure again. Refer to
DTC Description
.
Is the 1st trip DTC P2610 displayed again?
Replace ECM. Refer to Removal & Installation
ECM : Removal & Installation
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.
.
Repair or replace error-detected parts.Check the DTC. Refer to DTC Index...Replace ECM. Refer to Removal & InstallationECM : Removal & Installation.INSPECTION END