DTC | M.U.T.-III SE screen terms (Trouble diagnosis content) | DTC detection condition | ||
P2618 | 00 | Crankshaft position signal (Crankshaft position signal output circuit low) | Diagnosis condition | Engine running at idle |
Signal (terminal) | Crankshaft position sensor signal for electric intake valve timing control | |||
Threshold | The crankshaft position sensor signal edge count is less than 18 counts per one camshaft rotation | |||
Diagnosis delay time | 1 second |
Fail safe mode | Vehicle behavior | |
Device fix mode |
| |
Combustion control mode | Stratified charge combustion control at starting | No stratified charge combustion at starting (cold start). |