DTC | M.U.T.-III SE screen terms (Trouble diagnosis content) | DTC detection condition | |||
P2617 | 00 | Crankshaft position signal (Crankshaft position signal output circuit/open) | A | Diagnosis condition | Engine running at idle |
Signal (terminal) | Crankshaft position sensor signal for electric intake valve timing control | ||||
Threshold | The signal voltage of crankshaft position sensor is less than 1.0 V | ||||
Diagnosis delay time | 1 second | ||||
B | Diagnosis condition | Engine running at idle | |||
Signal (terminal) | Crankshaft position sensor signal for electric intake valve timing control | ||||
Threshold | The signal voltage of crankshaft position sensor is more than 5.8 V | ||||
Diagnosis delay time | 1 second |
Fail safe mode | Vehicle behavior | |
Device fix mode |
| |
Combustion control mode | Stratified charge combustion control at starting | No stratified charge combustion at starting (cold start). |