DTC | M.U.T.-III SE screen terms (Trouble diagnosis content) | DTC detection condition | ||
P2015 | 00 | Intake manifold runner posi sen/sw B1 (Intake manifold runner position sensor / switch circuit range / performance bank 1) | Diagnosis condition | Engine running at idle |
Signal (terminal) | Intake manifold runner control valve position sensor signal | |||
Threshold | ECM receives malfunction signal sent form intake manifold runner control valve position sensor. | |||
Diagnosis delay time | 5 seconds or more |
Engine operating condition in fail-safe mode | ||
Fail safe mode | Vehicle behavior | |
Device fix mode |
|
note | Warm up the engine until “COOLANT TEMP/S” on “DATA MONITOR” of M.U.T.-III SE reaches at least 60°C (140°F). |