[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTCM.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
P14C100CCS brake pedal SW (BCM)Diagnosis conditionIgnition switch ON
Signal (terminal)CAN communication signal
ThresholdWhen ECM detects self-diagnosis signal of stop light switch from BCM.
Diagnosis delay time
 
 
POSSIBLE CAUSE
Stop light switch (BCM)
 
 
FAIL-SAFE
Not applicable
 
 
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
Perform DTC confirmation procedure. Refer to DTC IndexDTC Index.
Is DTC detected?
Refer to DTC Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END