DTC | M.U.T.-III SE screen terms (Trouble diagnosis content) | DTC detection condition | ||
P0192 | 00 | FRP SEN/CIRC (Fuel Rail Pressure Sensor Circuit Low Bank 1) | Diagnosis condition | Engine running at idle |
Signal (terminal) | Fuel rail pressure sensor signal | |||
Threshold | Signal voltage from the fuel rail pressure sensor remains at less than 0.14V | |||
Diagnosis delay time | 5 seconds or more |
Engine operating condition in fail-safe mode | ||||
Fail safe mode | Vehicle behavior | |||
Traveling control mode | Accelerator angle variation control | ECM controls the accelerator pedal depression speed to make it slower than actual speed. This causes a drop in accelerating performance and encourages the driver to repair malfunction.
| ||
Combustion control mode | Stratified charge combustion control at starting | No stratified charge combustion at starting (cold start). |