2.CHECK INTAKE CAMSHAFT POSITION (CMP) SENSOR SIGNAL CIRCUIT FOR ELECTRIC INTAKE VALVE TIMING CONTROL
- Turn ignition switch OFF.
- Disconnect ECM harness connector and electric intake valve timing control module harness connector.
- Check the continuity between ECM harness connector and electric intake valve timing control module harness connector.
ECM | Electric intake valve timing control module | Continuity |
Connector | Terminal | Connector | Terminal |
F52 | 127 | F90 | 37 | Existed |
- Also check harness for short to power and short to ground.
Is the inspection result normal?
INSPECTION END Repair or replace error-detected parts.