[Previous][Next]
Diagnosis Procedure
1.CHECK DTC PRIORITY
If DTC P0326 is displayed with DTC P0327 or P0328, first perform the confirmation procedure (trouble diagnosis) for DTC P0327 or P0328.
Is applicable DTC detected?
Perform diagnosis of applicable. Refer to DTC Index.
.
 
2.CHECK INSTALLATION CONDITION OF KNOCK SENSOR
Visually check that the knock sensor is installed normally.
Is the inspection result normal?
.
Repair or replace error-detected parts.
 
3.CHECK INTERMITTENT INCIDENT
Check intermittent incident. Refer to Intermittent IncidentIntermittent Incident.
Is the inspection result normal?
.
Repair or replace error-detected parts.
 
4.CHECK KNOCK SENSOR CIRCUIT
Check knock sensor circuit. Refer to Component Inspection.
Is the inspection result normal?
.
Repair or replace error-detected parts.
 
5.PERFORM DTC CONFIRMATION PROCEDURE
  1. Turn ignition switch ON.
  2. Erase DTC.
  3. Perform DTC confirmation procedure. Refer to DTC Description.
Is the 1st trip DTC P0326 displayed again?
Replace ECM.
INSPECTION END