[Previous][Next]
Diagnosis Procedure
1.CHECK ELECTRIC INTAKE VALVE TIMING (IVT) CONTROL MODULE POWER SUPPLY AND GROUND CIRCUIT
Check electric IVT control module power supply and ground circuit. Refer to Diagnosis ProcedureDTC Diagnosis Procedure.
Is the inspection result normal?
.
Repair or replace error-detected parts.
 
2.PERFORM DTC CONFIRMATION PROCEDURE
  1. Erase DTC.
  2. Perform DTC confirmation procedure. Refer to DTC Description.
Is the DTC P0010 detected again?
Replace electric IVT control module. Refer to ELECTRIC INTAKE VALVE TIMING CONTROL MODULE : Removal & Installation.
INSPECTION END