[Previous][Next]
Component Inspection
1.CHECK ACC STEERING SWITCH
  1. Disconnect combination switch (spiral cable) harness connector.
  2. Check the resistance between combination switch harness connector terminals as per the following conditions.
    Combination switch
    (Spiral cable)
    		ConditionResistance
    (Approx.)
    Connector+−
    Terminals
    M1542136MAIN switch: PressedApprox. 0
    CANCEL switch: PressedApprox. 310
    DISTANCE switch: PressedApprox. 740
    SET− switch: PressedApprox. 1,410
    RES+ switch: PressedApprox. 2,590
    NOT OPERATEApprox. 5,456
Is the inspection result normal?
INSPECTION END
Replace ACC steering switch. Refer to Exploded View.