Component Inspection
1.
CHECK FUEL INJECTOR RELAY
Turn ignition switch OFF.
Remove fuel injector relay.
Check the continuity between fuel injector relay terminals as per the following conditions.
+
−
Condition
Continuity
Fuel injector relay
Terminal
1
2
12 V direct current supply between terminals 3 and 4
Existed
No current supply
Not existed
Is the inspection result normal?
INSPECTION END
Replace fuel injector relay.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
INSPECTION END
Replace fuel injector relay.