[Previous][Next]
Component Inspection
1.CHECK AIR FUEL RATIO (A/F) SENSOR 1
  1. Turn ignition switch OFF.
  2. Disconnect A/F sensor 1 harness connector.
  3. Check resistance between A/F sensor 1 terminals as per the following.
    A/F sensor 1Resistance
    +−
    Terminal
    341.8 - 2.44 Ω [at 20°C (68°F)]
    1∞Ω
    (Continuity should not exist)
    2
    4
    		1
    2
Is the inspection result normal?
INSPECTION END
.
 
2.REPLACE AIR FUEL RATIO (A/F) SENSOR 1
Replace air fuel ratio (A/F) sensor 1. Refer to Exploded View.
: INSPECTION END