[Previous][Next]
Inspection
 
 
LEVEL
  • Check that the reservoir tank engine coolant level is within the "MIN" to "MAX" when the engine is cool.
    : MAX
    : MIN
  • Adjust the engine coolant level if necessary.
    cautionRefill MITSUBISHI MOTORS GENUINE SUPER LONG LIFE COOLANT PREMIUM or equivalent. Refer to Fluids and Lubricants.
    warningTo avoid the blow out when the coolant is hot, never fill the coolant more than MAX level.
 
 
LEAKAGE
  • To check for leakage, apply pressure to the cooling system with the radiator cap tester (commercial service tool) (A) and the radiator cap tester adapter [SST:EG17651130] (B).
    Testing pressure: Refer to Radiator.
    warningNever remove reservoir tank cap when engine is hot. Serious burns may occur from high-pressure engine coolant escaping from engine cooling system.
    caution
    • Higher test pressure than specified may cause radiator damage.
    • Use radiator cap tester adapter [SST:EG17651130] (B) for connecting radiator cap tester (commercial service tool) (A) and filler neck to prevent deformation of reservoir tank filler neck.
    noteIn a case that engine coolant decreases, replenish radiator with engine coolant.
  • If anything is found, repair or replace damaged parts.