Removal and Installation
Removal
1.
Remove engine assembly. Refer to Removal and Installation.
Removal and Installation
2.
Remove drive belt. Refer to
Removal and Installation
.
Keep each auto-tensioner pulley arm locked after drive belts are removed.
3.
Remove drive belt auto-tensioner.
Installation
Installation is in the reverse order of removal.
caution
When installing drive belt auto-tensioner, be careful not to interfere with water pump pulley.
Never swap the pulley between new and old drive belt auto-tensioner.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
