Chassis Control Warning
DESIGN/PURPOSE
The warning message is displayed on the information display when “Chassis Control” detected the system malfunction.
Warning Message
Design
Warning Message
—
Chassis Control
System Error
See Owner’s Manual
SYNCHRONIZATION WITH MASTER WARNING LIGHT
Applicable
Full TFT meter: Refer to Master Warning Light
Master Warning Lamp
.
7 inch information display: Refer to Master Warning Light
Master Warning Lamp
.
SYSTEM DIAGRAM
SIGNAL PATH
The chassis control module transmits the meter display signal to the combination meter via CAN communication.
The combination meter shows the chassis control warning on the information display, according to the signal.
WARNING MESSAGE DISPLAY CONDITION
When all of the following conditions are satisfied
Ignition switch is ON
Chassis control system malfunction is detected. Refer to
DTC Index
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
..)
.