[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No. M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
B1A12-1AFront instrument right squawker out
(Front inst right squawker)
Diagnosis conditionWhen ignition switch is ON
Signal (terminal)Sound signal (between BOSE speaker amp. and instrument panel speaker RH)
ThresholdShort circuit
Diagnosis delay time30 seconds or more
 
 
POSSIBLE CAUSE
  • Instrument panel speaker RH circuit is malfunction
  • Instrument panel speaker RH
 
 
FAIL-SAFE
No sound from instrument panel speaker RH.
 
 
CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
  1. Turn ignition switch ON.
  2. Turn ignition switch OFF and wait for 4 minutes.
  3. Turn ignition switch ON and wait at least 1 minute or more.
  4. Select “Self Diagnostic Result” mode of “Audio amp.” using M.U.T.-III SE.
  5. Check DTC.
Is DTC B1A12-1A detected?
Proceed to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END