[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No. M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
B130B‐1CRear RH speaker
(Rear right speaker)
Diagnosis conditionWhen ignition switch is ON.
Signal (terminal)Sound signal (between AV control unit and rear door speaker RH)
ThresholdShort circuit
Diagnosis delay time1 second or more
 
 
POSSIBLE CAUSE
  • Rear door speaker RH circuit
  • Rear door speaker RH
 
 
FAIL-SAFE
No sound from rear door speaker RH.
 
 
CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
  1. Turn ignition switch ON.
  2. Turn ignition switch OFF and wait at least 4 minutes or more.
  3. Turn ignition switch ON and wait at least 1 minute or more.
  4. Select “Self Diagnostic Result” mode of “MULTI AV” using M.U.T.-III SE.
  5. Check DTC.
Is DTC “B130B-1C” detected?
Proceed to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident
-2Confirmation after repair: INSPECTION END