[Previous][Next]
Diagnosis Procedure
1.CHECK LVDS CABLE 1
  1. Turn ignition switch OFF.
  2. Check the connection status of the LVDS cable connector. (around view monitor control unit side, wire to wire, and side camera RH side)
Is inspection result normal?
.
Connect the LVDS cable connector correctly.
 
2.CHECK LVDS CABLE 2
  1. Turn ignition switch OFF.
  2. Disconnect around view monitor control unit connector and side camera RH connector.
  3. Check continuity between around view monitor control unit harness connector and side camera RH harness connector.
    Around view monitor control unitSide camera RHContinuity
    ConnectorTerminalsConnectorTerminals
    B8135D1511Existed
    362
  4. Check continuity between around view monitor control unit harness connector and ground.
    Around view monitor control unitGroundContinuity
    ConnectorTerminal
    B8135Not existed
Is inspection result normal?
Replace side camera RH. Refer to Removal and Installation.
Replace LVDS cable.