Diagnosis Procedure
1.
PERFORM CONFIRMATION PROCEDURE AGAIN
With M.U.T.-III SE
Turn ignition switch ON.
Erase DTC.
Perform DTC confirmation procedure again. Refer to
DTC Description
.
Is DTC B132A–01 detected again?
Replace AV control unit. Refer to
Removal and Installation
.
Check the intermittent incident. Refer to Intermittent Incident
Intermittent Incident
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
With M.U.T.-III SE
.
Replace AV control unit. Refer to Removal and Installation.
Check the intermittent incident. Refer to Intermittent IncidentIntermittent Incident.