[Previous][Next]
Position Light Indicator Light
 
 
DESIGN/PURPOSE
Position light indicator light informs the driver that parking light, license plate light, side marker light and tail light are in ON status.
 
 
BULB CHECK
Not applicable
 
 
SYNCHRONIZATION WITH MASTER WARNING LIGHT
Not applicable
 
 
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIGNAL
For actions on CAN communications blackout in the combination meter. Refer to Fail-Safe.
 
 
SYSTEM DIAGRAM
 
 
SIGNAL PATH
  • BCM transmits position light status signal to combination meter via CAN communication.
  • When combination meter receives position light status signal, combination meter turns position light indicator light ON.
 
 
LIGHTING CONDITION
When parking, license plate, side marker and tail light are turned ON.
 
 
SHUTOFF CONDITION
When parking, license plate, side marker and tail light are turned OFF.