1. Disconnect the battery cable from the negative terminal.
2. Disengage the fixing pawls and then remove IPDM E/R cover A .
: Pawl
3. Disengage the fixing pawls and then pull up IPDM E/R .
: Pawl
4. Disconnect the IPDM E/R harness connector and then remove IPDM E/R from the vehicle.
INSTALLATION
Install in the reverse order of removal.
caution
Be sure to perform ADDITIONAL SERVICE WHEN REPLACING IPDM E/R when replacing IPDM E/R. Or not doing so, IPDM E/R control function does not operate normally. Refer to Description.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.)
)
.