[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC detection condition
B120E-55IPDM E/R
(Intelligent power distribution module engine room)
[NOT CONFIGURED]Diagnosis conditionWhen ignition switch is ON
Signal (terminal)—
ThresholdConfiguration is not performed
Diagnosis delay time1 second or more
 
 
POSSIBLE CAUSE
  • Configuration is not performed
  • IPDM E/R
 
 
FAIL-SAFE
—
 
 
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
  1. Ignition switch ON.
  2. Check “Self Diagnostic Result” of “IPDM E/R” using M.U.T.-III SE.
Is DTC detected?
Refer to Diagnosis Procedure.
-1 To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2 Confirmation after repair: INSPECTION END