[Previous][Next]
Diagnosis Procedure
1.CHECK FUSE
Check for blown fuses.
Power sourceFuse No.Capacity
Ignition switch ON or START45A
Is the inspection result normal?
.
Be sure to eliminate cause of malfunction before installing new fuse.
 
2.CHECK IGNITION POWER SUPPLY CIRCUIT
  1. Turn ignition switch ON.
  2. Check voltage between wireless charger unit harness connector and ground.
    (+)(-)StandardReference value
    Wireless charger unit
    ConnectorTerminal
    M2131Ground9.0 - 16.0 VBattery voltage
Is the inspection result normal?
.
Repair or replace wireless charger unit power supply harness.
 
3.CHECK GROUND CIRCUIT
  1. Turn ignition switch OFF.
  2. Disconnect wireless charger unit connector.
  3. Check continuity between wireless charger unit harness connector and ground.
    Wireless charger unitGroundContinuity
    ConnectorTerminal
    M2134Existed
Is the inspection result normal?
INSPECTION END
Repair or replace wireless charger unit ground harness.