[Previous][Next]
Component Inspection (License Plate Light)
1.CHECK LICENSE PLATE LIGHT
  1. Ignition switch OFF.
  2. Disconnect license plate light connector.
  3. Check resistance of license plate light terminals.
    License plate lightResistance
    Terminal
    +–
    12Except 0 Ω
Is the inspection result normal?
INSPECTION END
.
 
2.CHECK LICENSE PLATE LIGHT BULB SOCKET
  1. Remove license plate light bulb.
  2. Check resistance of license plate light terminals.
    License plate lightResistance
    Terminal
    +–
    12Except 0 Ω
Is the inspection result normal?
Replace the corresponding license plate light bulb. Refer to Replacement.
Repair or replace the corresponding license plate light bulb socket.