1. Fully open power liftgate.
2. Disengage rear combination light cover fixing pawls, and then remove rear combination light cover. | : Pawl |
3. Remove rear combination light (body side) mounting bolts 
. 4. Apply protective tapes (A) on the part to protect it from damage. 5. Disengage rear combination light (body side) fixing clips using a remover tool (A) according to numerical order 1→2 indicated by arrows as shown in the figure, and then pull out rear combination light (body side). | : Clip |
6. Disconnect rear combination light (body side) harness connector, and then remove rear combination light (body side).
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.)
)
)
)