1. Install roolshade stay to sunshade base.
2. Install sunshade to sunshade base.| caution | - When installing, remove a pin etc. to unlock spring stopper.
- If spring tension becomes loose, turn spring stopper about 18.5 times while fixing sunshade so that it does not move, and then install.
|
3. Install sunshade base and roolshade stay, sunshade as a unit to sunroof frame assembly.
4. Install sunshade stay to sunshade slider.| note | After installation sunshade assembly, perform additional service. Refer to Description . |
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
using a remover tool (A) from sunshade slider 
as shown by the arrow in the figure.)
)
)
)
to lock spring stopper.)
)