[Previous][Next]
Work Procedure
1.CHECK ANTI-PINCH FUNCTION
  1. Fully open the sunroof.
  2. Place a piece of wood near the fully closed position.
  3. Close the sunroof completely with auto-slide closed.
  4. Check that sunroof lowers for approximately 150 mm (5.91 in) without pinching a piece of wood and stops.
  5. Fully open the sunshade.
  6. Place a piece of wood near fully closed position.
  7. Close the sunshade completely with auto-slide closed.
  8. Check that sunshade lowers for approximately 150 mm (5.91 in) without pinching a piece of wood and stops.
caution
  • Never check with hands or another part of the body because they may be pinched. never get pinched.
  • When the distance between pinching position and fully-open position is less than 150 mm (5.91 in), sunroof or sunshade reverses to fully-open position.
Is the inspection result normal?
END
Perform initialization procedure. Refer to Description.