[Previous][Next]
Work Procedure
1.PERFORM SYSTEM INITIALIZATION
  1. Close sunroof and sunshade.
  2. Press and hold the sunroof switch CLOSE for apporximately 10 seconds.
    Sunroof and sunshade will move as following.
    Sunroof tilt up, and the sunshade slightly close and stops.
  3. Release the sunroof switch, and continue to press the sunroof switch CLOSE again soon.
    Sunroof and sunshade will move as following.
    Sunshade fully open → sunroof tilt down → sunroof fully open → sunroof fully closed → sunshade fully closed.
  4. Release the sunroof switch after sunroof and sunshade stopped.
: .
 
2.CHECK THE FUNCTION
  1. Check that sunroof and sunshade automatically operated normally.
  2. Check anti-pinch function. Refer to Description.
: END