Component Inspection
1.
CHECK SUNSHADE SWITCH
Ignition switch OFF.
Disconnect sunroof switch assembly connector.
Check continuity sunroof switch assembly terminals under the following conditions.
Terminals
Condition
Continuity
7
10
Sunshade switch OPEN
Existed
Other than above
Not existed
12
Sunshade switch CLOSE
Existed
Other than above
Not existed
Is the inspection result normal?
INSPECTION END
Replace Sunroof switch assembly. Refer to
Removal and Installation
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
INSPECTION END
Replace Sunroof switch assembly. Refer to Removal and Installation
.