[Previous][Next]
Work Procedure
1.PERFORM ECM RECOMMUNICATING FUNCTION
  1. Install ECM.
  2. Contact backside of the registered Keyless operation key* to push-button ignition switch while brake pedal is depressed, then turn ignition switch ON.
    *: To perform this step, use the key that is used before performing ECM replacement.
  3. Maintain ignition switch in the ON position for at least 5 seconds.
  4. Ignition switch OFF.
  5. Check that the engine starts.
: .
 
2.PERFORM ADDITIONAL SERVICE WHEN REPLACING ECM
Refer to DescriptionDescription.
: END