DTC Diagnosis Procedure

1.CHECK DTC PRIORITY OF ELECTRIC SHIFT CONTROL MODULE

Select “Self Diagnostic Result” mode of “SHIFT” using M.U.T.-III SE.

Is the DTC detected?

Perform the trouble diagnosis related to the detected DTC. Refer to DTC Index

2.CHECK DTC PRIORITY OF KEYLESS OPERATION KEY UNIT

Select “Self Diagnostic Result” mode of “HANDS FREE MODULE” using M.U.T.-III SE.
If DTC B2042-4A is displayed with two or more DTCs are detected, refer to DTC inspection priority chart, and determine trouble disgnosis.

Is the DTC detected?

Perform the trouble diagnosis related to the detected DTC. Refer to DTC Index

3.PERFORM INITIALIZATION

Perform initialization of keyless operation key unit and registration of all keyless operation keys using M.U.T.-III SE.
For initialization and registration procedures, refer to M.U.T.-III SE immobilizer mode and follow the on-screen instructions.
Start the engine.

Dose the engine start?

INSPECTION END

Replace electric shift control module. Refer to Removal and Installation

: INSPECTION END