DTC Description

DTC DETECTION LOGIC

DTC No.	M.U.T.-III SE screen items (Trouble diagnosis content)	DTC detecting condition
B2045–4A	Electric shift ID discord (Electric shift identification discord)	Diagnosis condition	When ignition switch is turned from OFF to ON
		Signal (terminal)	CAN communication signal
		Threshold	When Keyless operation key unit detects that the ID verification result of the electric shift control module
		Diagnosis delay time	1 second or less

POSSIBLE CAUSE

Improper electric shift control module registration operation

FAIL-SAFE

Prohibit shifting the shift selector from P position

CONFIRMATION PROCEDURE

1.PERFORM DTC CONFIRMATION PROCEDURE

Ignition switch ON.
Check DTC in “Self Diagnostic Result” mode of “HANDS FREE MODULE” using M.U.T.-III SE.

Is DTC detected?

-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident

-2Confirmation after repair: INSPECTION END