Removal and Installation
REMOVAL
1.
Remove luggage side lower finisher LH. Refer to
Removal and Installation
.
2.
Disconnect automatic power liftgate control unit harness connector.
3.
Remove the automatic power liftgate control unit mounting nuts
, and then remove the automatic power liftgate control unit
.
INSTALLATION
Install in the reverse order of removal.
note
After installing automatic power liftgate control unit, perform additional service when replace control unit. Refer to Work Procedure
Work Procedure
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.
, and then remove the automatic power liftgate control unit 
.)
.