[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
B24A1-17A/C auto AMP.
(Air conditioning automatic amplifier)
Diagnosis conditionIgnition switch OFF (not auto ACC status)
Signal (Terminal)Accessory power supply
ThresholdShorted to battery
Diagnosis delay time30 seconds or more
 
 
POSSIBLE CAUSE
  • A/C amp.
  • Harness or connector (accessory power supply circuits is shorted to battery)
 
 
FAIL-SAFE
 
 
DTC CONFIRMATION PROCEDURE
1.PERFORM SELF-DIAGNOSIS
With M.U.T.-III SE
  1. Ignition switch ON.
  2. Select “Self Diagnostic Result” mode of “HVAC” using M.U.T.-III SE.
  3. Check DTC.
Is DTC detected?
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END