Diagnosis Procedure
1.
PERFORM SELF DIAGNOSTIC RESULT
With M.U.T.-III SE
Ignition switch ON.
Select “Self Diagnostic Result” mode of “HVAC” with M.U.T.-III SE.
Touch "Erase DTCs"
Ignition switch OFF.
Ignition switch ON.
Perform “DTC CONFIRMATION PROCEDURE”. Refer to
DTC Description
.
Is DTC detected again?
Replace A/C switch assembly. Refer to
Removal and Installation
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
With M.U.T.-III SE
.
Replace A/C switch assembly. Refer to Removal and Installation.
INSPECTION END