[Previous][Next]
Component Inspection
1.CHECK IN-VEHICLE SENSOR
  1. Ignition switch OFF.
  2. Remove in-vehicle sensor. Refer to Removal and Installation.
  3. Check resistance between in-vehicle sensor terminals. Refer to applicable table for the normal value.
    TerminalConditionResistance: kΩ
    Temperature: °C (°F)
    12−20 (−4)16.50
    −10 (14)9.92
    0 (32) 6.19
    10 (50)3.99
    20 (68)2.65
    25 (77)2.19
    30 (86)1.81
    40 (104)1.27
Is the inspection result normal?
INSPECTION END
Replace in-vehicle sensor. Refer to Removal and Installation.