[Previous][Next]
Component Inspection
1.CHECK INTAKE SENSOR
  1. Ignition switch OFF.
  2. Remove intake sensor. Refer to Removal and Installation.
  3. Check resistance between intake sensor terminals. Refer to applicable table for the normal value.
    TerminalConditionResistance: kΩ
    Temperature: °C (°F)
    12−20 (−4)23.60
    −10 (14)13.46
    0 (32) 8.00
    10 (50)4.93
    20 (68)3.14
    25 (77)2.54
    30 (86)2.06
    40 (104)1.39
Is the inspection result normal?
INSPECTION END
Replace intake sensor. Refer to Removal and Installation.